Huawei USG6000 Upgrade Manual page 26

HUAWEI USG6000&USG9500
Upgrade Guide
Table 1-1 Deleted Commands
The command
statistic enable
authentication mode
{ multi-share | multi-authen
[ max-user max-user ] }
authentication timer
handshake-period
handshake-period
undo authentication mode
[ multi-authen max-user ]
undo authentication timer
handshake-period
undo dot1x-access-profile
display dot1x quiet-user
{ all | mac-address mac-
address }
display dot1x-access-profile
configuration [ name name ]
[ undo ] access-user arp-
detect vlan vlan-id ip-
address ip-address mac-
address mac-address
[ undo ] dot1x mc-trigger
port-up-send enable
[ undo ] dot1x quiet-period
[ undo ] dot1x
reauthenticate
[ undo ] dot1x unicast-
trigger
access-user arp-detect
default ip-address ip-
address
authentication trigger-
condition { arp | dhcp } *
dot1x authentication-method
{ chap | pap | eap }
Issue 01 (2018-01-16)
Cause of Deletion
The VLAN statistics
function is not supported.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
This The command is not
supported in this version.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 USG6000
Impact
The command configuration
is lost after the upgrade.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
17