Huawei USG6000 Upgrade Manual page 61

HUAWEI USG6000&USG9500
Upgrade Guide
3.
Step 7 If the file fails to be uploaded, the uploaded incomplete file cannot be deleted immediately.
Therefore, you need to delete the incomplete file after the device is restarted. Specify the
system software to be used for the next startup.
On the System Software Management page, click
to specify the file as system software for the next startup.
Step 8 Restart the device.
Figure 1-27 reboot
Step 9 (Optional) Upgrade sensitive features.
l
Issue 01 (2018-01-16)
NOTICE
The name of the file to be uploaded cannot exceed 48 characters.
After the upload succeeds, the System Software Management page is displayed. The
corresponding files are listed on the page. Check whether the size of the uploaded file in
the list and the size of the file on PC2 are the same. If no, upload the file again.
Click Browse..., select the system software (must be a .bin file) to be uploaded, and click
Upload. The name of the file to be uploaded cannot be the same as the name of any
existing file in the CF card.
During the upload, do not close the Internet Explorer.
NOTE
If the configuration file for the next startup is imported, restart the device without saving the running
configuration. Otherwise, the running configuration will overwrite the imported configuration.
If sensitive features are not involved, the upgrade to V500R001C80SPC100 is complete. Otherwise, go
to the next step.
NOTE
l Ensure that an activated license file is available. If the license file is not activated, the upgrade fails.
l Ensure that the device can access the security center directly or through a proxy server.
l Configure a security policy to permit HTTP and FTP packets when the device directly connects to
the security center or permit HTTP packets when the device connects to the security center through a
proxy server. For details, see the description of security policies and content security in
USG6000&USG9500 V500R001C80SPC100 Administrator Guide.
l Before executing the following online loading procedure, ensure that the DNS server address has
been configured and the DNS server can correctly parse http://sec.huawei.com.
Upgrading V500R001 to V500R001C80SPC100.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
of the uploaded file and then click OK
1 USG6000
52