Huawei USG6000 Upgrade Manual page 170

HUAWEI USG6000&USG9500
Upgrade Guide
Step 11 In the Ethernet submenu, enter 4 to return to the BootROM main menu.
Step 12 In the BootROM main menu, enter 4 to access the Boot Files Submenu. Enter 1 to set the
version software for the next startup.
Enter your choice(1-7): 1
Boot file is cfcard:/USG9520V500R001C80SPC100.cc, modify the file name if
needed.
Please input correctly, e.g.: cfcard:/USG9520V500R001C80SPC100.cc cfcard:/
USG9520V500R001C80SPC100.cc
The file name you input is cfcard:/USG9520V500R001C80SPC100.cc.
Are you sure? Yes or No(Y/N)y
Setting ...Done!
Clear version back signal...Done!
You must enter an absolute path when setting the version software for the next startup.
Step 13 In the Boot Files Submenu, enter 2 to set the PAF file for the next startup.
Enter your choice(1-7): 2
Paf file is cfcard:/paf.txt, modify the file name if needed.
Please input correctly, e.g.: cfcard:/paf.txt cfcard:/paf.txt
The file name you input is cfcard:/paf.txt.
Are you sure? Yes or No(Y/N)y
Setting ...Done!
Clear version back signal...Done!
You must enter an absolute path when setting the PAF file for the next startup.
Step 14 In the Boot Files Submenu, enter 3 to set the license file for the next startup.
Enter your choice(1-7): 3
License file is cfcard:/license.txt, modify the file name if needed.
Please input correctly, e.g.: cfcard:/license.txt cfcard:/license.txt
The file name you input is cfcard:/license.txt.
Are you sure? Yes or No(Y/N)y
Setting ...Done!
Clear version back signal...Done!
You must enter an absolute path when setting the license file for the next startup.
Step 15 In the Boot Files Submenu, enter 7 to return to the BootROM main menu.
Step 16 If both MPUs are in position, insert the cable connected to the console port of PC1 into the
console port of the standby MPU, and the cable connected to the network interface of PC2
into interface GE0/0/0 of the master MPU. Press the Reset button to restart the MPU, enter
the BootROM menu, download the version software, and set the version software, PAF file
and license file for the next startup.
Step 17 In the BootROM main menu, enter 2 to start the device from CF card 1.If both MPUs are in
position, insert the cable connected to the console port into the console ports of the master and
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 USG9500
161