Table 3.15 Ports And Leds Of The Plim - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
SPECIFICATIONS
The PLIM data module provides 16 ports of 10/100 BASE-T.
FRONT VIEW OF PLIM BOARD
The front view of the PLIM data module is shown in the picture below.
The front panel components of the PLIM have the functions below:
Ports & LEDs
P1~P16
Left LED of each
port
Right LED of each
port
3.3.12 GPLIM (Gigabit PoE LAN Interface Module)
The GPLIM is a Layer 2 Gigabit LAN switch module providing power over Ethernet to
any connected device. This module provides 12-10/100 BASE-T interface port and 2-
1000 BASE-TX/SX/LX ports.
compliant device that is connected its Ethernet ports. All Samsung ITP phones and
SMT-R2000 Dual-Band AP's can receive power when connected to the GPLIM. When
Figure 3.34 Front View of the PLIM Board

Table 3.15 Ports and LEDs of the PLIM

Function Description
RJ-45 (10/100 Base-T) LAN ports (Full Duplex).
The LED ON indicates if the link is operating.
- Blink: The link is transmitting/receiving data packets.
The LED indicates if the port of 10 BASE-T/100 BASE-Tx is
operating.
- Off: The port is operating as 10 BASE-T port.
- On: The port is operating as 100 BASE-T port.
The GPLIM can provide power to any IEEE 802.3af
3.36
Table of Contents
Home Page
INSTALLATION
PART 3 JUNE 2006