Samsung OfficeServ 7400 Technical Manual page 59

OfficeServ 7400
TECHNICAL MANUAL
Ports & LEDs
RUN LED
LAN Tx LED
LAN Rx LED
SVC LED
DSP LED
RTPT LED
RTPR LED
3.3.16 WLAN (WIRELESS LAN)
Refer to the SMT-R2000 AP documentation for wireless LAN installation and
configuration information.
3.3.17 SVMi-20E
The SVMi-20E card can be installed in the OfficeServ 7000 Series Systems.
This section provides the additional steps required to set up the SVMi-20E for operation
in the OfficeServ 7000 Series Systems. Included is other basic information regarding
components making up the SVMi-20E.
General Description, Installation, Programming and other Guides for all details including
optional modules and their installation.
Function Description
This LED indicates MP40 status.
- Off: Power is not being supplied.
- On: Booting.
- Blink: The RAM program is operating.
This LED indicates the transmit status of the LAN port.
- Off: Data is not being transmitted.
- On or blink: Data is being transmitted.
This LED indicates the receive status of the LAN port.
- Off: Data is not being received.
- On or blink: Data is being received.
This LED indicates if the service is being offered.
- This LED blinks when program is being modified or configuration is
being loaded.
This LED indicates if the VoIP DSP is operating.
- This LED blinks when the VoIP channels are engaged.
This LED indicates if the voice packets are being forwarded.
- This LED turns on when the voice packets are forwarded.
This LED indicates if the voice packets are being received.
- This LED turns on when the voice packets are received.
Refer to the SVMi-20E Documentation CD for
3.44
Table of Contents
Home Page
INSTALLATION
PART 3 JUNE 2006