Software And Database Management; Software Management; Database Management - Samsung OfficeServ 7400 Technical Manual

Table of Contents
Home Page
OfficeServ 7400 INSTALLATION
TECHNICAL MANUAL PART 9 JUNE 2006
PART 9. SOFTWARE AND DATABASE
MANAGEMENT

9.1 SOFTWARE MANAGEMENT

The OfficeServ 7400 operating software is stored on the SmartMedia card which is
inserted into the front of the MP40 card. The SmartMedia card has 32 Megabytes of
NAND flash memory and is formatted, with a custom format to allow faster loading, in a
similar manner to a hard disk. In addition to the operating system the SmartMedia card
can carry operating software for the LP40 card and the TEPRI/TEPRIA/TEPRI2 card.
The SmartMedia card also has the capability to store a backup copy of the system
database in addition the operating software files.
Software can be downloaded from the SmartMedia card to the cards listed above using
MMC 818 and will be stored in those cards on-board flash memory. The cards will
automatically reboot, load and run the new software when the download process is
complete. Files can be deleted using MMC 819, File Control. This is necessary to clean
up the SmartMedia.

9.2 DATABASE MANAGEMENT

The Customer database can be saved to the SmartMedia card using MMC 815 where it
is stored as a single file. This save can be performed manually or the system can be
programmed to save the database automatically at a designated time every day. Using
WebMMC the database can be downloaded from the system and stored on the PC or it
can be uploaded from the PC to the system. The database uploaded from WebMMC is
not stored in the SmartMedia card but is loaded directly into active memory.
9.1