Samsung OfficeServ 7400 Technical Manual page 93

OfficeServ 7400
TECHNICAL MANUAL
7.1.5 Connecting Ethernet to LAN port on modules
GWIM/PLIM/GPLIM/GSIM/MGI/MGI64/MP40/LP40/SVMi-20E/TEPRI2 boards can be
connected to Ethernet by using an Ethernet cable.
Pin No.
Modules with
standard
10/100BaseT
LAN connector
PLIM
Refer to the GWIM, GSIM and GPLIM user manuals for details on connecting to the
Gigabit interfaces on these modules.
7.1.6 Connecting a Wireless LAN Access Point
Refer to the SMT-R200 AP documentation for wireless LAN installation information.
7.1.7 Connecting to a Door Phone and a Door Lock
Connect a door phone and a door lock to the OfficeServ 7400 system by using a Door
Phone Interface Module (DPIM).
1) Connect a twisted pair of #24 AWG or #26 AWG wires to the LINE port of DPIM and
to P1 through P8 of 8DLI/16DLI2/8COMBO boards of the OfficeServ 7400 system.
1 2 3
Tx+ Tx- Rx+
Tx+ Tx- Rx+
Figure 7.7 RJ-45 Port of Boards for Ethernet
7.5
Home Page
RJ-45 port
4 5 6
- - Rx-
RTN RTN Rx-
Table of Contents
INSTALLATION
PART 7 JUNE 2006
7 8
- -
-48 V -48 V