Samsung OfficeServ 7400 Technical Manual page 101

OfficeServ 7400
TECHNICAL MANUAL
Figure 7.19 Connecting a Station Device to a KDB via MDF
CONNECTING TO THE KDBS
There are two methods for connecting devices to keyset daughterboards. The simplest
method is to connect the second device directly by means of a line cord.
7.17 and 7.18.
The second method is to use a multi-pair station cable, connecting separate station
jacks to the first two pairs. A line cord can now be connected between the
daughterboard and the second jack. This returns the daughterboard port to the MDF
for cross-connection to another cable run (see Figure 7.19).
7.13
Table of Contents
Home Page
INSTALLATION
PART 7 JUNE 2006
See Figures