Samsung OfficeServ 7400 Technical Manual page 27

OfficeServ 7400
TECHNICAL MANUAL
Port, LED
PSC
LAN
SIO
RST
RUN LED
Rx LED
TX LED
DBD LED
FAN LED
PoE1
PoE2
LAN
Connection for OfficeServ 7150 PoE power supply Alarm port
Port for connecting 10/100 BASE-T LAN (reserved for future use)
For internal Samsung engineering use only
Button for resetting LP40 module
Indicates the status of the LP40.
- Off: No power supplied or abnormal status
- Orange Blink: Card is booting
- Green Blink: Normal status
Indicates data is being received from the MP40
- Off: No signal
- Green Blink: Data reception in progress
Indicates data is being sent to the MP40
- Off: No signal
- Green Blink: Data transmission in progress
Indicates the presence of a daughter board installed
- Off: Daughter board not installed on the LP40
- Green On: One or more daughter board is installed on the LP40
Indicates fan operation status
- Green On: All FAN are operating normally
- Red Blink: One or more fans in the cabinet is malfunctioning
Indicates the status of PoE1 power supply in the OfficeServ 7150 if connected
to the alarm port.
- Off: PoE1 power supply dismounted
- Green On: Normal
- Red On: Abnormal
Indicates the status of PoE2 power supply in the OfficeServ 7150 if connected
to the alarm port..
- Off: PoE2 power supply dismounted
- Green On: Normal
- Red On: Abnormal
Indicating the status of LAN.
- Off: LAN disconnected
- Green Blink: Operated in 10 Mbps
- Green On: Operated in 100 Mbps
3.12
Home Page
Function Description
Table of Contents
INSTALLATION
PART 3 JUNE 2006