Samsung OfficeServ 7400 Technical Manual page 16

OfficeServ 7400
TECHNICAL MANUAL
PART 3. INSTALLING AND REPLACING
BOARDS
This section describes how to install and replace various boards of the OfficeServ 7400
system.
3.1 CABINET CONFIGURATION
The main and expansion cabinets of the OfficeServ 7400 system have 12 slots each.
The slots are numbered 0 ~11 as shown below.
• Slot 0 in EVERY cabinet is reserved ONLY for the LP40 card.
• Slot 3 in the MAIN cabinet is reserved ONLY for the MP40 card.
• In the MAIN cabinet, Slots 1,2, 4~11 are UNIVERSAL SLOTS. The MAIN cabinet
has 10 UNIVERSAL SLOTS.
• In OfficeServ 7400 EXPANSION cabinets, slots 1~11 are UNIVERSAL SLOTS. Each
OfficeServ 7400 EXPANSION CABINET has 11 UNIVERSAL SLOTS.
• A three-cabinet OS7400 system has a maximum of 32 UNIVERSAL SLOTS.
• All universal slots in the MAIN cabinet are 64 channel slots.
• All universal slots in the OfficeServ 7400 Expansion cabinet are 32 channel slots.
• All universal slots in the OfficeServ 7200 Expansion cabinet are 16 channel slots.
SLOT 0-LP40
SLOT 3
Expansion
Cabinet 2
SLOT 6
SLOT 9
SLOT 0-LP40
Expansion
SLOT 3
Cabinet 1
SLOT 6
SLOT 9
SLOT 0-LP40
Main
SLOT 3-MP40
Cabinet
SLOT 6
SLOT 9
SLOT 1
SLOT 2
SLOT 4
SLOT 5
SLOT 7
SLOT 8
SLOT 10
SLOT 11
SLOT 1
SLOT 2
SLOT 4
SLOT 5
SLOT 7
SLOT 8
SLOT 10
SLOT 11
SLOT 1
SLOT 2
SLOT 4
SLOT 5
SLOT 7
SLOT 8
SLOT 10
SLOT 11
Figure 3.1 Front Panel Configuration
3.1
Table of Contents
Home Page
INSTALLATION
PART 3 JUNE 2006