Samsung OfficeServ 7400 Technical Manual page 95

OfficeServ 7400
TECHNICAL MANUAL
MMC
MMC 211
program duration of contact closure.
program, refer to OfficeServ 7400 Programming Section.
7.1.8 Connecting KDB-D/KDB-S
KDB-D and KDB-S are modules installed on a digital phone connected to the
OfficeServ 7400 system. The KDB module enhances the functions of the phone and
increases the number of local ports according to module types.
Caution for connecting KDB module
KDB-D and KDB-S is only for a digital phone connected to the 8DLI board, not
for a digital phone connected to a 16DLI2 board.
• Place the keyset face down on a flat surface.
• Remove the base pedestal by placing your thumbs over the
attachment clips and press outward while simultaneously pressing
down on the keyset body with your fingertips.
Figure 7.11 Adding an iDCS Keyset Daughterboard Module
is used to assign call numbers to door phones. Use
REMOVE
KNOCKOUTS
7.7
Home Page
PART 7 JUNE 2006
For detailed instruction on the MMC
SECURING
SCREWS
Table of Contents
INSTALLATION
MMC 501 to