User Sma Clock - Xilinx KCU116 User Manual

User SMA Clock

[Figure 2-1, callout 9]
The KCU116 board provides a pair of SMAs for differential user clock input into FPGA U1
bank 66 (see Figure
U1 GC pin J23, with the N-side SMA J169 signal USER_SMA_CLOCK_N connected to U1 GC
pin J24. Bank 66 V
not exceed 1.2V.
X-Ref Target - Figure 3-8
KCU116 Board User Guide
UG1239 (v1.2) September 28, 2018
3-8). The P-side SMA J168 signal USER_SMA_CLOCK_P is connected to
is 1.2V VCC1V2. The USER_SMA_CLOCK input voltage swing should
CCO
Figure 3‐8: User SMA Clock
www.xilinx.com
Chapter 3: Board Component Descriptions
X18292-121616
Send Feedback
32