Mitsubishi Electric MDS-B-SPJ2 Series Specification Manual page 90

< Class: Others >
No. Abbr. Name
SP225 ~ SP252
SP253 DA1NO DA output channel
1 data No.
SP254 DA2NO DA output channel
2 data No.
SP255 DA1MP D/A output channel
Y 1 magnification
SP256 DA2MP D/A output channel
Y 2 magnification
< Class: Motor constants >
No. Abbr. Name
SP257 Motor constant
RPM
~
~
(H-coil)
SP320
BSD
SP321
~
SP384
6. Status Display and Parameter Setting
Description
Not used. Set to 0.
The output data No. for the 1st channel of the
D/A output function is set. The speedometer is
output when this is set to 0.
Refer to the output specifications in section 6.5
for details.
The output data No. for the 2nd channel of the
D/A output function is set. The load meter is
output when this is set to 0.
Refer to the output specifications in section 6.5
for details.
The output data magnification for the 1st
channel of the D/A output function is set. The
magnification is 1 when this is set to 0.
Refer to the output specifications in section 6.5
for details.
The output data magnification for the 2nd
channel of the D/A output function is set. The
magnification is 1 when this is set to 0.
Refer to the output specifications in section 6.5
for details.
Description
This is valid only in the following two conditions.
(1)
When SP034 (SFNC2) - bit 0 is 1 and bit 2 is
0.
The constants for the motor that is a special
motor not described in 6.2.(2), and is not a
winding changeover motor.
(2)
When SP034 (SFNC2) - bit 0 is 1 and bit 2 is
1.
The constants for the winding changeover
motor H winding side motor are set.
(Note) This parameter must not be changed by
the user.
Not used. Set to 0.
6 − 10
Standard
TYP CNG Unit
setting
DEC 0
∗
DEC 0
DEC ∗ 0
DEC ∗ 0 1/256-fol
d
DEC ∗ 0 1/256-fol
d
Standard
TYP CNG Unit
setting
HEX 0000
HEX 0000
Tolerable
setting
range
~
0 ~ 32767
0 ~ 32767
0 ~ 32767
0 ~ 32767
Tolerable
setting
range
0000 ~
FFFF
~