Mitsubishi Electric MDS-B-SPJ2 Series Specification Manual page 36

● SJ-PF7.5-01
Terminal box
Exhaust
Cooling fan
M10 screw
(2 places marked with ※.)
Note 1. Leave 30mm or more between the cooling fan and
the wall.
Note 2. The vertical shaft can also be installed on the
bottom. (Use the screws marked with a
Note 3. When removing the suspension bolts during use,
close the screw hole with a bolt (M10 × 15 or less).
Terminal box
Arrow nameplate
(direction of cooling air)
Suction
Cooling fan
M10 screw
(2 places marked with ※.)
Note 1. Leave 30mm or more between the cooling fan and
the wall.
Note 2. The vertical shaft can also be installed on the
bottom. (Use the screws marked with a
Note 3. When removing the suspension bolts during use,
close the screw hole with a bolt (M10 × 15 or less).
2. Specifications
The terminal box lead outlet can
be changed to the left or right.
Suspension bolt (M10 screw)
Rating nameplate
Suction
.)
※
Cross-section AA
The terminal box lead outlet can
be changed to the left or right.
Suspension bolt (M10 screw)
Rating nameplate
.)
※
Cross-section AA
2 − 15
Speed detector
Ground
connector
(M5 screw)
( )
flange
3-M5 × 0.8 screw, depth 10
Speed detector
Ground
connector
(M5 screw)
Cooling fan motor
Exhaust
3-M5 × 0.8 screw, depth 10
Cooling fan motor
BU,BV, BW
(M4 screw)
Motor U, V, W
(M6 screw)
2-M8 screw
Shaft end details
A112F
BU,BV, BW
(M4 screw)
Motor U, V, W
(M6 screw)
Shaft end details
A112T