ABB PSTX Series Installation And Commissioning Manual page 66

6.4.3 Event log
Path in menu:
Menu Event log
For navigation, see Figure 6.28.
The Event log menu shows the event log in the
Softstarter. The log shows the 100 latest events in
chronological order, with "type of event" and date.
For details about all events push details.
Use navigation keys to view all entries in the event log.
The types of event logs are:
• Faults
• Protections
• Warnings
• Parameter changed
• Run
See Figure 6.29.
Faults
Use the Navigation keys to select a Fault and push
"Details" to read details about the Fault (Name, On time
and Event count). Then push the i-key to see information
6
about the Fault. Push
menu.
Protections
Use the Navigation keys to select a Protection and
push "Details" to read details about the Protection
(Name, On time and Event count). Push the i-key to see
information about the Protection. Push
back to Protections log menu.
Warnings
Use the Navigation keys to select a Warning and push
"Details" to read details about the Warning (Name,
On time and Event count). Then push the i-key to see
further information about the Warning. Push
to go back to Warning log menu.
Parameter changed
Use the Navigation keys to select a parameter and
push "Details" to read details about the changed
parameter (Name, On time and Event count). Push
"Back" to go back to Warning log menu.
Run
Use the Navigation keys to select a run event and push
"Details" to read details about the run event (Name,
On time and Event count). Push
Warning log menu.
66 Human machine interface (HMI) | Installation and commissioning manual |
"Back" to go back to Faults log
"Back" to go
"Back"
"Back" to go back to
MENU
Parameters
Assistants
Motor jog
Pump cleaning
Event logs
Event log
Faults
Protections
Warnings
Backup handling
Parameter changed
Run
System info
Settings
Figure 6.28
Event log navigation
Local PSTX
Event logs
Faults
Protections
Warnings
Parameter changed
Run
Done 12:00
Figure 6.29
Event log
1SFC132081M0201
Select