ABB PSTX Series Installation And Commissioning Manual page 65

6.4.2 Assistants
Path in menu:
Menu Assistants
For navigation, see Figure 6.26.
For more details on how to set Basic set-up and
Application set-up, see chapter 2 Quick start.
For more information about Assistants and Application
list, see chapter 7.24 Assistants.
The Assistants menu contains default settings and
parameters. Use this menu to set only the necessary
parameters before you can start the motor. All necessary
input data shows up in an automatic loop. The Assistants
menu is divided in:
• Basic set-up
• Application set-up
INFORMATION
After you select an application and make your
changes, do not select this application again
because this resets the application to the default
settings.
Enter the Assistants menu
Push "Menu" and select Assistants with the
Navigation keys.
Push "Select" to enter the Assistants menu.
Basic set-up
Use the Navigation keys to select Basic set-up.
Push "Select" to enter the Basic set-up.
The Basic set-up menu is divided in 5 steps:
Language, Date and time, Motor data, System
configuration and Setup complete.
Application set-up
The Application set-up are quick settings for Applications,
Values and Tune settings.
Use the Navigation keys to select Application set-up.
Push "Select" to enter the Application set-up.
Select for what type of application you use the Softstarter
by pushing "Select".
See Figure 6.27.
1SFC132081M0201 | Installation and commissioning manual | Human machine interface (HMI)
MENU
Parameters
Assistants
Motor jog
Pump cleaning
Event log
Backup handling
System info
Settings
Figure 6.26
Assistants navigation
Local PSTX
Application set-up
Band saw
Bow thruster
Centrifugal pump
Circular saw
Conveyor belt short
Done 12:00
Figure 6.27
Application set-up
Basic set-up
Application set-up
1(4)
Select
65
6