ABB i-bus KNX Product Manual page 65

®
ABB i-bus KNX
Commissioning
Status response statistic
obj. "Number of faults statistic"
Options:
This parameter enables the 4 byte communication object Number of faults statistic. Using this communica-
tion object, the number of different faults (lamp, emergency lighting converter, ballast) or the sum of all
faults in the lighting group is queried or sent via a single communication object.
yes: Using the communication object Number of faults statistic, the number of different faults (lamp,
emergency lighting converter, ballast) or the sum of all faults in the lighting group are queried or sent
via a single communication object.
no: The information about the number of faults in a lighting groups is not sent in a single communica-
tion object on the KNX.
With the option yes..., a further parameter appears:
yes
no
send object value
Options: after a change
after request
after a change or request
after a change: The status is sent after a change.
after request: The status is sent after a request.
after a change or request: The status is sent after a change or a request.
DGN/S 1.16.1 | 2CDC 507 114 D0201 63