Parameter Window Scenes - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.3

Parameter window Scenes

This parameter window appears if in
Scenes 1 Bit / Bit has been set with yes.
The DGN/S facilitates the integration of the 16 lighting groups in 14 scenes.
In order to parameterize a scene in the ETS, the respective parameter window of the scene must first of all
be enabled.
For further information see: Scene, page 135
Enable Scene x/y (x/y = 1/2, 3/4, 5/6...13/14)
Options:
This parameter enables different parameter windows Scene x (x= 1, 2,...14) in pairs.
yes: The Scene x parameter windows are enabled in pairs.
no: The Scene x parameter windows are not enabled.
84 2CDC 507 114 D0201 | DGN/S 1.16.1
Parameter window
yes
no
General, page 27, the parameter Enable function