Hitachi Compute Blade 500 Series User Manual page 80

Parameters
<blade_no>
Slot number of server blade in the server chassis.
-b
Shows the versions of the firmware stored in the BMC firmware storage
destination and the EFI firmware destination (bank).
Show items
-- Server blade firmware version --
Slot
Slot number of the server blade in the server chassis.
-- Total version --
Current version
Current server blade firmware version
Next version
Next server blade firmware version to be used at the next boot
-- BMC version --
Current version
Current BMC version
Next version
Next BMC version to be used at the next boot
Bank 0 version
BMC version for bank 0.
The version is displayed when the -b parameter is specified.
Bank 1 version
BMC version for bank 1.
The version is displayed when the -b parameter is specified.
-- EFI version --
Current version
Current EFI version
Next version
Next EFI version to be used at the next boot
2-62
Range is from 0 to 7.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all server blades.
Range is from 0 to 7.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide