User; Show User Ldap - Hitachi Compute Blade 500 Series User Manual

User

show user ldap

Command
show user ldap
Description
Shows the setting of LDAP.
Role
Account
Parameters
None
Show items
-- Connection setting --
LDAP
LDAP enable/disable
Authentication
User authentication method
LDAP server
IP address of LDAP server
Port number
Port number of LDAP server
2-152
enable : LDAP enable
disable : LDAP disable
ldap : Authentication is performed by using the LDAP server only.
local : Authentication is performed by using the local and LDAP
servers.
UP to 3 addresses can be registered.
This is an FQDN, IPv4 address, or IPv6 address (maximum of 127
characters).
Space cannot be used for head and the last.
The character type which can be used for FQDN are alphabetic
character ([A-Z], [a-z]), number ([0-9]), hyphen (-), and period (.).
Range is from 1 to 65535.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide