Set User Password Policy - Hitachi Compute Blade 500 Series User Manual

Example
[Displays the password policy]
$ show user password policy
-- Password policy --
Management of password expiration : enable
Password expiry period
Change expired password
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
This command displays the settings for the handling of the password
expiration date, the period (number of days) while a password is available,
and the event that should occur if the password expires. You can use the
show user account command, which displays account information, to check
the number of days remaining until the password for each account expires.

set user password policy

Command
set user password policy [-m <management>] [-p <expiry_period>]
[-e <expired_login>] [-F]
Description
Sets the password policy.
Set the following items:
• Handling of the password expiration date
• The period (number of days) while a password is available
• Event that occurs when the password expires
One of the following events occurs when the password expires:
1 The user cannot log in.
.
The user cannot log in. The console is disconnected.
Note, however, that users with the account privilege can change the
password and then log in.
2 The user can change the expired password and then log in.
.
When the user attempts to log in, a window appears and prompts the
user to change the password. The user can change the password and
then log in.
Role
Account
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
: 30
: enable
2-185