Show Sw-Module Hardware - Hitachi Compute Blade 500 Series User Manual

-- LED status –
LED type
LED indicator type
Light
LED indicator status
Message
None
Example
[To display the status of switch module 0.]
$ show sw-module status 0
-- Switch module status --
Slot
Install
Power
Booting
Fail
Warning
-- LED status --
LED type
Light
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None

show sw-module hardware

Command
show sw-module hardware [<sw_no>] [-h] [-f] [-s]
normal: The status of the switch module is normal.
warning: A warning was issued for the switch module. Check the
details of the warning in the system event log.
-----: The switch module is not installed.
Location Led: LID lamp (identification LED indicator)
-----: The switch module is not installed.
on: The LED indicator is lit.
off: The LED indicator is unlit.
-----: The switch module is not installed.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
: 0
: installed
: on
: off
: normal
: normal
: Location Led
: off
2-105