Hitachi Compute Blade 500 Series User Manual page 314

Date and time when Optional Physical MAC address is changed.
P
Slot number of server blade.
In SMP configuration, the primary server blade slot number is shown.
S
Slot number of server blade.
Card
Card classification
Controller
Controller number on card
Port
Port number of controller
Before
MAC address before change.
After
MAC address after change.
From
Component to request to change
Message
None
Example
[Shows Optional Physical MAC change log.]
$ show log mac-edit
Timestamp
Before
------------------- - - ------- ---------- ----
----------------- ----------------- -------
2014-09-30 13:46:29 2 0 MC1
2-296
Range is from 0 to 7.
Range is from 0 to 7.
MCx : Mezzanine card. "x" is the slot number of card.
IOxx : PCI card. "xx" is the slot number of card.
IOxx-xx : PCI card of I/O slot expansion unit. "xx" of the first half is
the slot number of I/O slot expansion unit connection board. "xx" of
the second half is the slot number on I/O slot expansion unit.
BSMx : Change from BSM. "x" is BSM number.
console : Change from console.
P S Card
After
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
Controller Port
From
0 1