Hitachi Compute Blade 500 Series User Manual page 247

If there is a limit on the IPv4 addresses from which Telnet connections
are permitted, the network address indicating the range of permitted
IPv4 addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "0.0.0.0" is displayed.
Subnetmask
Subnet mask
If there is a limit on the IPv4 addresses from which Telnet connections
are permitted, the subnet mask indicating the range of permitted IPv4
addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "0.0.0.0" is displayed.
-- TELNET setting (IPv6) --
Allow
IPv6 connection permission
allow: IPv6 connections are permitted.
deny: IPv6 connections are prohibited.
Network address
Network address
If there is a limit on the IPv6 addresses from which Telnet connections
are permitted, the network address indicating the range of permitted
IPv6 addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "::" is displayed.
Subnetmask
Subnet mask
If there is a limit on the IPv4 addresses from which Telnet connections
are permitted, the subnet mask indicating the range of permitted IPv4
addresses is displayed.
If there is no limit on the addresses from which connections are
permitted, "0.0.0.0" is displayed.
Message
None
Example
[To display TELNET connection permission settings for IPv4 and IPv6
addresses]
$ show remote-access protocol telnet
-- TELNET setting --
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-229