Hitachi Compute Blade 500 Series User Manual page 255

If omitted when adding a server, "all" is set for this parameter. If
omitted when updating, the value doesn't change.
-ai <bsm_alert_ interval>
Alert retry interval
The retry interval (sec) when failing to notify an alert.
Range is from 5 to 50.(sec)
If omitted when adding a server, 5(sec) is set. If omitted when
updating, the value doesn't change.
-at <bsm_alert_ duration>
Alert retry duration
The retry duration (min) when failing to notify an alert.
Range is from 4 to 20(min).
If omitted when adding a server, 10(min) is set. If omitted when
updating, the value doesn't change.
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[Sets the following information on ServerConductor/Blade Server Manager
server.]
The name of server: SERV1
IP address: 192.168.0.30
Alert port: 20011
Alert level: all
Alert retry interval: 30(sec)
Alert retry duration: 20(min)
$ set bsm server -n SERV1 -i 192.168.0.30 -ap 20011 -al all -ai
30 -at 20 -F
I0001 : Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
None
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-237