Hitachi Compute Blade 500 Series User Manual page 292

-at <snmp_mgr_auth_type>
Type of authentication.
-ap <snmp_mgr_auth_password>
Password for authentication.
-et <snmp_mgr_encrypt_type>
Type of encryption.
-ep <snmp_mgr_encrypt_password>
Password for encryption.
-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[Edits the setting of SNMP manager.(v1/v2c)]
$ set snmp manager -n 0 -s v1/v2c -h 192.168.10.20 -p 162 -c
community_name
Confirm? (y/[n]):y
I0001 : Setting was completed.
2-274
noauth-nopriv : without authentication, without encryption.
auth-nopriv : with authentication, without encryption.
auth-priv : with authentication, with encryption.
Available when SNMP version is v3.
vmd5 : MD5.
sha : SHA.
Available only when the version of SNMP is v3 and the access type is
auth-nopriv or auth-priv.
Available only when the version of SNMP is v3 and the access type is
auth-nopriv or auth-priv.
des : DES.
aes : AES.
Available only when the version of SNMP is v3 and the access type is
auth-priv.
Available only when the version of SNMP is v3 and the access type is
auth-priv.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide