Switch Mgmt-Module Behavior - Hitachi Compute Blade 500 Series User Manual

Example
[Restarts the management module 0.]
$ restart mgmt-module 0
W0001 : If confirm, this connect is lost.
Confirm? (y/[n]):y
If the management module on the connection destination is restarted, the
session is disconnected.
[Restarts the active management module.]
$ restart mgmt-module -a
W0001 : If confirm, this connect is lost.
Confirm? (y/[n]):y
If the management module on the connection destination is restarted, the
session is disconnected.
[Restarts the standby management module.]
$ restart mgmt-module -s
W0001 : If confirm, this connect is lost.
Confirm? (y/[n]):y
S0002 : Command succeeded.
S0000 : Command was finished.
$
If a management module that is not on the connection destination is
restarted, the results are displayed and the prompt reappears.
Comment
Console session connecting to the management module in the server chassis
will be disconnected after execution of this command.

switch mgmt-module behavior

Command
switch mgmt-module behavior [-F]
Description
Switch behavior of the management module.
Role
Chassis
Parameters
-F
Executes the command without inquiry.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-113