Message
None
Example
[Updates the firmware of management module.]
$ update mgmt-module firmware
W0002 : If confirm, in case of updating management module
firmware, it will restart and this connect will be lost.
Confirm? (y/[n]):y
I0016 : Update firmware was started. Please wait.
I0015 : Update firmware was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
You need to send the firmware update file with FTP protocol before executing
this command.
The session is disconnected from the management module after executing
this command.
Do not send the firmware update file during firmware update using this
command.
•
If you do, update may fail. If it fails, execute the update again.
•
If you do with the management module firmware version A0145 or earlier
in redundant configuration, not only does the update fail but also the
standby management module may fail. If so, contact your reseller or
maintenance personnel.
delete mgmt-module file
Command
delete mgmt-module file {-a|-f <file_name>} [-F]
Description
Deletes files in the user directory of management module.
Role
Chassis
Parameters
-a
Delete all files.
2-126
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide