Logout; File Operation; Upload - Hitachi Compute Blade 500 Series User Manual

When the password expiration date of the logged-in user approaches, the
initial window displays a message that prompts the user to change the
password.
Your password will expire soon. Please change password before
expiration.
If a user with the account privilege logs in, the initial window displays the
following warning message when there is a user whose password is
expired.
There is the account that the password has expired.
If a user with the account privilege logs in, the initial window displays the
following warning message when there is a user whose password is about
to expire.
There is the account that the password will expire soon.

Logout

Enter exit in the CLI prompt, and then press Enter.
$ exit
Tip: Setting a timeout value allows you to log out automatically.
A timeout value can be set on each account. The specified timeout value is
applied when the user logs in. The factory default value is 10 minutes.

File operation

The CLI console uses the user home directory of the management module for
file input/output when command execute file upload/download.
For details, see

Upload

The following procedure describes how to apply the uploaded firmware file to
the system unit.
1 Login to the management module through the system console.
.
2 Upload the target file from the system console to the user home directory
.
of management module by ftp or sftp.
3 Apply the file of user home directory of management module to the
.
system unit by CLI command.
1-4
- "$"
Chapter 2, CLI
Common function
Hitachi Compute Blade 500 Series CLI Console User's Guide
command.