Hitachi Compute Blade 500 Series User Manual page 199

Description
Modifies roles.
Specify a currently registered role to modify. Specify all privileges to assign
to the role. Roles used by account cannot be modified.
Role
Account
Parameters
-i <role_id>
Specify a role ID consisting of up to 31 alphabetical characters. Cannot be
omitted.
-b <blade_no>: Server blade privilege
Specify privilege of operating server blade to assign to the role.
Specify a server blade number from 0 to 7 whose privilege is assigned.
You can specify multiple server blades.
When "all" is specified, the privilege of all server blades is assigned.
Make sure to specify -b followed by a number or all. Without -b, the role
has no privilege for all server blades.
-s <switch_no>: Switch module privilege
Specify switch module privileges to assign to the role.
Specify a switch module number from 0 to 3 whose privilege is assigned.
You can specify multiple switch modules.
When "all" is specified, the privilege of all switch modules is assigned.
Make sure to specify -2 followed by a number or all. Without -2, the role
has no privilege for all switch modules.
-n: Network privilege
Specify privilege of operating network to assign to the role.
When -n is specified, the role has the network privilege.
When omitted, the role has no network privilege.
-c: Server chassis privilege
Specify privilege of operating server chassis to assign to the role.
When -c is specified, the role has the server chassis privilege.
When omitted, the role has no server chassis privilege.
-a: Account privilege
Specify privilege of operating account to assign to the role.
When -a is specified, the role has the account privilege.
When omitted, the role has no account privilege.
-r: Read only privilege
Specify read only privilege to assign to the role.
When -r is specified, the role has the read only privilege.
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-181