Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 822

Processing details
• These instructions calculate the exponent of the value specified by (s), and store the operation result in the device specified
by (d).
(s)+1
(
Single-precision real number
• Exponent operation is performed with the base (e) set to "2.71828".
• When an input value is set using the engineering tool, a rounding error may occur. Refer to the following for the precautions
on setting input values using the engineering tool.
Page 49 Precautions
Operation error
Error code Description
(SD0)
The value input to (s) is -0, a subnormal number, NaN (not a number), or .
3402H
3403H The data output from (d) exceeds the following range. (An overflow has occurred.)
|(d)|<2
• The EXP(P) instruction performs operation using the natural logarithm. To determine a value using the
common logarithm, determine a value by dividing the common logarithm value by 0.43429 and specify it in
the device specified by (s).
X
10
7 APPLICATION INSTRUCTIONS
820
7.9 Real Number Instructions
(s) (d)+1
)
Single-precision real number
128
X
0.43429
= e
(d)