■Applicable devices
Operand
Bit
X, Y, M, L,
J\
SM, F, B, SB,
FX, FY
(s1)
(s2)
(s3)
(s4)
(d1)
(d2)
(d3)
■Search target table name
Operand: (s2)
Device
Item
+0 to +
Table name
■Search target field name
Operand: (s3)
Device
Item
+0
Number of fields
+1 to +
Field name
*1 "0" to "16" for a programmable controller CPU with firmware version earlier than "28"
The following figure shows the format of (s3).
b15
(s3)
(s3)+1
1
(s3)+32
n
(s3)+32*n
Word
T, ST, C, D, W,
U\G, J\,
SD, SW, FD, R,
U3E\(H)G
ZR, RD
Description
Specify the search target table name with up to 32 characters.
Description
Specify the number of fields to be searched.
If 0 is specified, all fields of the table are subject to output.
Specify each search target field name with 32 characters. The last address in (s3)
varies according to the number of fields.
=33n
Specify field names, each fixed to 32 characters, by the number of fields with
Unicode character strings. For the name less than 32 characters, the character string
should be right-justified and filled with 0000H to become a 32-character string.
This setting of this item is not necessary when "0" is specified in (s3)+0. (Ignored if
specified.)
b0
Set the number of fields, 'n'.
A field name set in the 1st field
A field name set in the 'n'th field
Double word Indirect
specification
Z
LT, LST,
LZ
LC
Data for 'n' fields (If zero is
set to (s3), setting for these
data is not required.)
7 APPLICATION INSTRUCTIONS
7.21 Database Access Instructions
Constant
Others
K, H E
$
Setting range
Set by
User
Setting range
Set by
*1
0 to 128
User
User
969
7