Got Side Settings; Setting Communication Interface - Mitsubishi Electric GOT1000 Series Connection Manual

12.4 GOT Side Settings

12.4.1 Setting communication
interface

Controller setting
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
12 - 6
12. VIDEO/RGB CONNECTION

12.4 GOT Side Settings

Click!
[Controller Setting] from the

Settings for the video/RGB equipment
3.
4.
1.
Select [Common]
RGB Input] from the menu.
2.
Set the interface to which the video/RGB equipment is
connected.
3.
Check the [Use Video/RGB Input] to set the function.
For details on the function setting, refer to the
following manual.
GT Designer3 Version1 Screen Design Manual
4.
Clicking the detail setting button displays the
Communication Detail Settings dialog box for each
communication driver.Make the settings according to
the usage environment.
12.4.2 Communication detail settings
Click the [OK] button when settings are completed.
2.
3.
[Peripheral Setting]
4.
Click!
[Video/