Got Side Settings; Setting Communication Interface (Communication Settings); Communication Detail Settings - Mitsubishi Electric GOT1000 Series Connection Manual

Microcomputers, modbus products, peripherals
Hide thumbs Also See for GOT1000 Series:
Table of Contents

Advertisement

3.5 GOT Side Settings

3.5.1
Setting communication
interface (Communication
settings)
Set the channel of the equipment to be connected to the
GOT.
2.
1.
Select [Common]
[Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: Others
• Controller Type: Computer
• I/F: Interface to be used
• Driver: Ethernet (MICROCOMPUTER)
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.

3.5.2 Communication detail settings

Click the [OK] button when settings are completed.
POINT
POINT
POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
3.5.2
Make the settings according to the usage environment.
GT16, GT14
3.
4.
GOT IP Address
Click!
Subnet Mask
Default Gateway
Ethernet Download
Port No.
GOT Communication
Port No.
Startup Time
Delay Time
3. MICROCOMPUTER CONNECTION (ETHERNET)
Communication detail settings
Item
Description
Set the IP address of the GOT.
*1
(Default: 192.168.3.18)
Set the subnet mask for the
sub network. (Only for
connection via router)
*1
If the sub network is not used,
the default value is set.
(Default: 255.255.255.0)
Set the router address of the
default gateway where the
*1
GOT is connected. (Only for
connection via router)
(Default: 0.0.0.0)
Set the GOT port No. for
Ethernet download.
(Default: 5014)
Set the GOT port No. for the
connection with the Ethernet
module.
(Default: 5021)
Specify the time period from
the GOT startup until GOT
starts the communication with
the PLC CPU.
(Default: 3sec)
Set the delay time for reducing
the load of the network/
destination PLC.
(Default: 0ms)
3.5 GOT Side Settings
1
2
3
4
Range
0.0.0.0 to
255.255.255.
255
5
0.0.0.0 to
255.255.255.
255
0.0.0.0 to
255.255.255.
255
6
1024 to 5010.
5014 to
65534
(Except for
5011, 5012,
5013 and
49153)
1024 to 5010.
5014 to
7
65534
(Except for
5011, 5012,
5013 and
49153)
3 to 255sec
8
0 to 10000
(
10ms)
3 - 69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents