Device Range That Can Be Set - Mitsubishi Electric GOT1000 Series Connection Manual

3.7 Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may
not be monitored.

Setting item
Item
Set the device name, device number, and bit number.
Device
The bit number can be set only when specifying the bit of word device.
Information Displays the device type and setting range which are selected in [Device].
Device name
Internal relay (M)
Special relay (SM)
Latch relay (L)
Word device bit
Data register (D)
Link special register (SD)
File register (R)
Bit device word
Description
Setting range
M0 to
SM0 to
L0 to
Specified bit of the following word devices
D0 to
SD0 to
R0 to
Converting bit devices into word
3. MICROCOMPUTER CONNECTION (ETHERNET)
3.7 Device Range that Can Be Set
Device No. representation
M2047
SM63
Decimal
L2047
D4095
SD15
Decimal
R4095
1
2
3
4
5
6
7
8
3 - 73