Connectable Model List; System Configuration - Mitsubishi Electric GOT1000 Series Connection Manual

11. VNC(R) SERVER CONNECTION

11.1 Connectable Model List

®
The VNC server can be connected to the following VNC

11.2 System Configuration

PC
R
(VNC client)
Personal computer
®
(VNC client)
Twisted pair cable
• 10BASE-T
Shielded twisted pair cable (STP)
To be selected by the or unshielded twisted pair cable
user. (UTP): Category 3, 4, and 5
• 100BASE-TX
Shielded twisted pair cable (STP):
Category 5 and 5e
*1 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver, wireless LAN adapter (NZ2WL-JPA or NZ2WL-JPS), or other system
equipment corresponding to the applicable Ethernet network system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standard.
For the controllers that can be connected to the wireless LAN adapters and how to set the wireless LAN adapter, refer to the
manual of the wireless LAN adapter used.
*2 A straight cable is available.
When connecting the GOT and PC directly with Ethernet cable, remember that the by cross cable is available.
*3 When connecting GT16 of the function version A to an equipment that meets the 10BASE (-T/2/5) standard, use the switching
hub and operate in a 10Mbps/100Mbps mixed environment.
For how to check the function version, refer to the following.
*4 A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*5 GT14 models compatible with Ethernet connection are only GT1455-QTBDE, GT1450-QMBDE and GT1450-QLBDE.
11 - 2
11. VNC(R) SERVER CONNECTION

11.1 Connectable Model List

CPU
PC
Connection cable
Maximum
segment
*1*2
Connection cable
length
GT16 User's Manual (Hardware)
®
client.
Software
Ultra VNC
Extended function OS
VNC Server
GOT
R
(VNC server)
Varies according to the
connection type.
®
GOT (VNC
Option device
*4
100m - (Built into GOT)
Communication driver
Ethernet system
server)
PLC
Model
For the system
*3
configuration between
the GOT and PLC,
*5
refer to each chapter.
Communication driver
Connection type
dependent
PLC
Number of
connectable
equipment
1 personal
computer for 1
GOT