Mitsubishi Electric GOT1000 Series Connection Manual page 184

(6) Set clock data (TS) command
The following shows an example of setting the clock data of GOT.
(Assuming the clock data of GOT is to be set to "2009, October 1, 18:46:49 Thursday".)
Item
(format 1: GOT-A900 Series microcomputer connection (ASCII))
Request message
(host GOT)
(format 2: GOT-A900 Series microcomputer connection (Binary))
Response message
during normal
communication
(GOT host)
Response message
during faulty
communication
(GOT host)
POINT POINT POINT
When a wrong day of the week has been set by the clock data setting command
If a wrong day of the week is set by the clock data setting commands, the clock data will differ from the time
displayed on the utility.
Example: When October 1, 2009 (Tuesday) is set by the clock data setting command (the actual day of the week is
Thursday), Thursday (THU) will be displayed on the utility time display.
3 - 28
3. MICROCOMPUTER CONNECTION (ETHERNET)
3.4 Message Formats
After execution
Command Year data Month data
T S 0 9 1 0
54 53 30 39 31 30
H H H H H
(H) (L) (H) (L) (H) (L)
Command
T S
Time display
2009/10/01 18:46:49
THU
Message format
Day data Hour data Minute data
0 1 1 8 4
30 31 31 38 34
H H H H H H
(H) (L) (H) (L) (H)
Year Month Day Hour Minute Second
data data data data data data
2E 31
09 0A 01 12
H
H H H H
ACK
06
H
Error
NAK
code
15 06
H H
The above is a case where
the sum check error (06 )
H
has occurred.
Second Day-of-
data week data
6 4 9 0 4
36 34 39 30 34
H H H H H
(L) (H) (L) (H) (L)
Day-of-
week data
04
H H