Mitsubishi Electric GOT1000 Series Connection Manual page 54


RS-485 interface
Use the following as the RS-485 interface and RS-422/485 communication unit connector on the GOT.
For the GOT side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector model
GOT
*2
GT16
GT14
GT12
GT1155-QTBD
GT1155-QSBD
GT1150-QLBD
GT105 -Q
GT104 -Q
GT1030
GT1020
GT15-RS4-9S
GT15-RS4-TE
*1 For the checking procedure of the hardware version, refer to the User's Manual.
*2 When connecting to the RS-422/485 interface, use HDR-E14MAG1+ as a cable connector.
To use HDR-E14MAG1+, a dedicated pressure welding tool is required.
For details on the connector and pressure welding tool, contact Honda Tsushin Kogyo Co., Ltd..
*3 The terminal block (MC1.5/9-ST-3.5 or corresponding product) of the cable side is packed together with the GT1030, GT1020.
(2) Connector pin arrangement
GOT main part connector
see from the front
1
14-pin (female)
1 - 26
1. PREPARATORY PROCEDURES FOR MONITORING
1.4 Connection Cables for the Respective Connection
*1
Hardware version
― 14-pin (female)
―
―
C or later
9-pin D-sub (female)
M2.6 millimeter screw
F or later
fixed type
C or later
A or later
B or later
9-pin terminal block
E or later
9-pin D-sub (female)
― M2.6 millimeter screw
fixed type
―
GT16
8 14
7
Connector type Connector model
HDR-EC14LFDT1-SLE+
17LE-13090-27(D3AC)
*3
MC1.5/9-G-3.5BK
17LE-13090-27(D3AC)
― SL-SMT3.5/10/90F BOX
GT15, GT14, GT12, GT11,
GT105 , GT104
GOT main part connector
see from the front
5 1
9 6
9-pin D-sub (female)
Manufacturer
Honda Tsushin Kogyo Co., Ltd.
DDK Ltd.
PHOENIX CONTACT Inc
DDK Ltd.
Weidmuller interconnections inc
GT1030, GT1020
See from the back of a
GOT main part
9-pin terminal block