ABB IRC5 Product Manual page 58

2 Installation and Commissioning, IRC5
2.5.2. Connecting power supply to the IRC5 Panel Mounted Controller
Continued
Connecting power supply 230V 10A to Control Module
The following procedure details how to connect power supply to the Control Module.
56
Action
1. Route and strap the power supply 230V
10A cable as the illustration to the right
shows.
2. Connect the power supply 230V 10A
cable to the control power supply
connector X1.
• phase 1 to G2.X1:1
• earth to G2.X1:3
• phase 2 (N) to G2.X1:5
3. Connect incomming earth to PE.
Note/Illustration
xx0600003321
• A: power supply 230V 10A
• B: incomming earth
3HAC027707-001 Revision: D