ABB IRC5 Product Manual page 108

4 Repair activities, controller IRC5
4.2. Replacement of panel board
Continued
Refitting
The procedure below details how to refit the panel board unit.
106
Action
2.
esd
WARNING!
The unit is sensitive to ESD, before handling the
unit please observe the safety information in
section WARNING - The unit is sensitive to ESD!
on page 27
3. Disconnect all connectors.
4. Remove the lower attachment screws, and remove
the Panel Unit.
Action
1.
DANGER!
Before any work inside the cabinet, please observe
the safety information in section
sure that the main power has been switched off! on
page 26.
Note/Illustration
NOTE!
Make a note of any connections.
xx0600003227
•
•
Note/Illustration
DANGER - Make
3HAC027707-001 Revision: D
A: fixed attachments
B: hole for attachment
screw
Continues on next page