2.5.7. Connection to serial channel connector
Overview
The controller has one serial channel RS232 for permanent use which can be used for
communication point to point with printers, terminals, computers or other equipment.
The following sections detail connection to the serial channel connector (COM1) on the
computer unit.
Location DSQC639
The serial channel connector is placed on the computer unit as shown below.
xx0600002892
A
Required equipment
Equipment
Circuit diagram
3HAC027707-001 Revision: D
Description
COM1
2 Installation and Commissioning, IRC5
2.5.7. Connection to serial channel connector
Note
See
Circuit Diagram on page 195
65