Cover, Holder, Ic, Right Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C
21. Remove the two screws securing "Cover, Holder, IC, Right" and remove
"Cover, Holder, IC, Right". (Refer to Figure 4-152.)
C.B.S. 3x6: 2 pcs.
When the "Ink Lever" is installed against the angle set
location as shown in the illustration, confirm that the two
holes of "Fan Gear, 34" form a line parallel to the bottom
of "Frame, Holder, IC".
Angle Set Location
Ink Lever
Frame, Holder, IC
Align the two dowels on holder side with the two
positioning holes on the "Cover, Holder, IC, Right".
(Refer to Figure 4-152.)
Disassembly & Assembly
Fan Gear, 34
Holes
Parallel Alignment
Disassembly Procedures
Dowels and Positioning Holes
C.B.S. 3x6
Figure 4-152. Cover, Holder, IC, Right Removal
Revision C
Cover, Holder, IC, Right
314