Roller Assy., Ld, Left / Roller Assy., Ld, Right; "Gear, 44.47" And "Lever, Hopper, Release" Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

4.2.6.2 Roller Assy., LD, Left / Roller Assy., LD, Right

1. Remove "ASF Unit" (p246).
2. Remove the "E-ring, 6", and pull out the "Gear, 44.74" and "Lever, Hopper,
Release" from the "Shaft, Roller, LD".
When installing the "Gear, 44.74" and "Lever, Hopper,
Release" to the "Shaft, Roller, LD", face the surfaces with the
longer ribs of both the "Gear, 44.74" and the "Lever, Hopper,
Release" toward the "ASF Unit" side, and match the
respective ribs of the shaft holes with the grooves of the
"Shaft, Roller, LD".
Disassembly & Assembly
Figure 4-62. "Gear, 44.47" and "Lever, Hopper, Release" Removal
Disassembly Procedures
Revision C
Lever, Hopper, Release
Gear, 44.47
E-ring, 6
254