Asf Paper Sensor Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C
4.2.6.5 ASF Paper Sensor
1. Remove PCB Unit. (Refer to "4.2.4.1 C593 MAIN Board" (p226).)
2. Release "ASF Paper Sensor" harness from clamp.
3. Release the two tabs securing "ASF Paper Sensor" and then release "ASF
Paper Sensor".
4. Disconnect connector from "ASF Paper Sensor".
Disassembly & Assembly Disassembly Procedures
Clamp
Harness
Figure 4-76. ASF Paper Sensor Removal
Revision C
ASF Paper Sensor
Connector
265