Optional Interface; Reply Message; Reply For Option Command - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

1.6.3 Optional Interface

Type-B interface (level 3, MIB, 1200mA type) is supported.

REPLY MESSAGE

Main-Type
MT48p, PW170cl10cpi, PRG (A0xxxx) rev, AP800ma,
SPD0fast , D4, GDI
NOTE: xxxx is F/W version.
In the case of Stylus Pro 4450/4880/4880C, (B0xxxx) is used
instead of (A0xxxx).As for the main board of Stylus Pro 4450/4880/
4880C supplied as ASP, the firmware for 4-color is preintalled on
it.
Product-Name:
8-color model
<Stylus Pro 4800> or <Stylus Pro 4880> or <Stylus Pro 4880C>
4-color model
<Stylus Pro 4400> or <Stylus Pro 4450>
Emulation-Type: ESCPL2-00
Entity-Type: EPSONLQ2J
Product Description

REPLY FOR OPTION COMMAND

Option command
number
00h No-operation
01h Start Hardware Reset
02h Start Software Reset
03h Send Main System Type
04h Send Name Data
05h Inquire Name Data
06h Send Product Name
07h Send Software Emulation Type
08h Complete Buffered Data
09h Stop Procedure
0Ah Return Buffered Data
0Bh Send Entity Type
0Ch Send Status
0Dh Quit Procedure
0Eh Inquire ASCII Message
0Fh Send ASCII Message
10h-13h
14h Inquire Emergency Message
15h Send Emergency Reply
16h-1Fh
20h-FFh
Interface
Table 1-50. Reply List
Command name Reply-A
Accept
Accept
Reject
Accept
Reject
Accept
Accept
Accept
Accept
Reject
Reject
Accept
Accept
Reject
Reject
Accept
Unknown
Accept
Accept
Unknown
Reserved
Revision C
Reply-B
None
Execute OK
Check Condition
Execute OK
None
None
Execute OK
None
None
108