C593_Sub Board; Moving The Carriage Unit; Carriage Cover Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

4.2.4.3 C593_SUB Board

1. Open "Cover, Printer".
When performing the following steps, remove protective
C A U T I O N
equipment if it is installed and make sure to release the
Carridge Unit lock with the "Transport Retaining Lever".
Refer to "4.2.1.1 Release of the Transport Retaining Lever"
(p207).
2. Release the carriage lock and move the "Carriage Unit" to the position
shown in Figure 4-41.
(Refer to "4.2.1.2 Carriage Unit Lock Release/Lock Set Method" (p208).)
3. Remove the three screws securing the "Carriage Cover" and remove the
"Carriage Cover" upward. (Refer to Figure 4-42.)
C.B.P. 3x8: 3 pc.
Disassembly & Assembly
Carriage Unit
Carriage Cover
C.B.P. 3x8
Disassembly Procedures
Slot
Figure 4-41. Moving the Carriage Unit
Figure 4-42. Carriage Cover Removal
Revision C
C.B.P. 3x8
234