EPSON Stylus Pro 4400/4450/4800/4880/4880C
4.2.3.7 Cover, Rear
1.
Remove "Cover, Printer" (p221).
2.
Remove "Cover, Side, Right" (p217).
3. Remove the three screws securing "Cover, Rear" and remove "Cover,
Rear" upward.
Shaft, Installation, CR:
C.B.S. 3x6:
Align the two ribs of the "Cover, Rear" with the two
positioning holes on the"Release Unit".
Disassembly & Assembly
2 pcs.
1 pc.
Ribs and Positioning Holes
Release Unit
Cover, Rear
Shaft, Installation, CR
Disassembly Procedures
Figure 4-25. Cover, Rear Removal
Revision C
C.B.S. 3x6
223