Mount Assy., Plate, Motor, Asf, Sp Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C
3. Insert screwdriver through hole at lower right of "Spur Gear, 16" removed
in Step 2 and remove the screw securing "Mount Assy., Plate, Motor, ASF,
SP".
C.B. 3x8: 1 pc.
4. Remove the two screws securing "Mount Assy., Plate, Motor, ASF, SP"
and then remove "Mount Assy., Plate, Motor, ASF, SP".
C.B.S. 3x6: 1 pc.
Disassembly & Assembly
Mount Assy., Plate, Motor, ASF, SP
Figure 4-71. Mount Assy., Plate, Motor, ASF, SP Removal
Disassembly Procedures
Revision C
Step 4
C.B.S. 3x6
Step 3
C.B. 3x8
Step 4
C.B.S. 3x6
260