EPSON Stylus Pro 4400/4450/4800/4880/4880C
4.2.6 ASF
This section discribes the "ASF Unit" removal and the assembly and
disassembly of the main components comprising the ASF.
4.2.6.1 ASF Unit
This section explains the working procedure using the "ASF
C A U T I O N
EXCHANGE SUPPORT TOOL". Always prepare the tool
before performing work because performing work without
the specified tool may cause damage to the printer or result
in injury.
Base, Left
Disassembly & Assembly
Stand (x2)
Joint Plate
Base, Right
Disassembly Procedures
1.
Remove "Cover, Side, Left" (p216).
2.
Remove "Cover, Side, Right" (p217).
3. Remove "Cover, Motor, PF" and disconnect the connector from the "ASF
phase sensor".
(Refer to "4.2.6.4 ASF Phase Sensor" (p263).)
Revision C
246