4.1.4 Difference Between 8-Color And 4-Color Models In Disassembly/Assembly - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

4.1.4 Difference Between 8-color And 4-color Models In Disassembly/Assembly

The Stylus Pro 4800/4880/4880C (8-color model) and Stylus Pro 4400/4450 (4-color model) are equipped with different units or parts depending on how many
cartridges can be installed.
This chapter describes based on the 8-color model. When disassembling/assembling a 4-color model, refer to the table below to make sure the difference between
the 8-color model and 4-color model.
Item
IH right unit not 4-color model is not equipped
equipped with the I/H right unit on the right
side.
The 4-color model is equipped
with the "Cover, Front, Right 4
Color" on the location where the
8-color model would be equipped
with the "I/H Right Unit".
Routing of "Tube, While the "Tube, Supply, Ink" of
Supply, Ink" the 8-color model is connected to
the right ink holder, That of the 4-
color model is routed to the "I/H
Left Unit".
Connecting locations of The connecting locations are
"I/H Left Unit" and different between the two types
"Tube, Supply, Ink" of models because all the eight
"Tube, Supply, Ink"s of the 4-
color model are connected to the
"I/H Left Unit".
CSIC connectors on The 4-color model does not use
C511_SUB-B Board not the CN39, CN42, CN43, CN45,
used and CN36 connectors on the
C511_SUB-B Board.
Disassembly & Assembly
Table 4-3. List of Difference in Disassembly/Assembly for Stylus Pro 4400 (4-color model)
Explanation
Stylus Pro 4800/4880/4880C
(8-color model)
Introductory Information
Stylus Pro 4400/4450
(4-color model)
" I/H Right Unit /
I/H Lever Sensor
(Right) (p305)"
" Cover, Front,
Right 4 Color (4-
color Model)
(p365)"
" I/H Left Unit / I/
H Lever Sensor
(Left) (4-color
model) (p362)"
" Connectors/
Harnesses
Connected to
C511_SUB-B
Board (p236)"
Revision C
Reference
205